Lumel NA6, Руководство пользователя

Страница: 35 / 77

'
Fig. 10. Bargraph modes.
Notice!
– The meter is working in the measuring range of defined indications by the user
in LoIn and HiIn parameters. Below and over, it shows a range exceeding.
– In case when the meter is working with a resistance thermometer in a two-wire
system, the choice of the automatic compensation option of conductor
resistance changes will cause a defective meter operation and the display of
ErrC inscription.
– In case of the display individual characteristic switching on, the result on the
display is linearly converted according to the introduced parameters: I_H1 ,
I_H2 , d_Y1 i d_Y2 .
– In case of arithmetical functions and individual characteristic switching on, in
the first sequence, arithmetical operations will be carried out and the obtained
result is converted by the individual characteristic.
– In case of the analog output individual characteristic switching on, the
measurement result is linearly converted according to the introduced para-
meters: d_H1 , d_H2 , O_Y1 i O_Y2 .
?
:ntr
sect
p:nt
tren
Examplary settings of the bargraph and the alarm, ex. 1
= G (green)
Curl
= r (red)
Curl
Type of
bargraph
Notes
Value under the
value
prl
Value between
and
prl prH
Value ower
prH
Value without
changes in time
Value
increases
Value
decreases
= rG (red+green)
CurH
0neC
All manuals and user guides at all-guides.com