Lumberjack DP20-1630F, Инструкция по безопасности и эксплуатации

Страница: 17 / 24

DP20-1630F 15
OPERATION & MAINTENANCE AND SERVICE
Operation
–Practise on waste material first to learn how to
operating the machine.
–When drilling all the way through a piece of
material, adjust the table so the drill is aligned
with the centre of the table. Secure the work
piece securely an unsecured work piece results
in a rough drilling hole and increases the risk of
the drill bit breaking.
–Use a piece of waste wood beneath your
workpiece to reduce the risk of the work piece
splinting and protect the drill tip.
–Use the lift handles to slowly bring the drill
downwards and slowly feed the drill into the
workpiece.
–Drill extra slowly when the drill bit is about to
break through the workpiece to prevent
splintering.
Switching on
Lift the safety stop case and engage the green
start button.
Simply press the Red button to stop the machine
Switching on
Lift the safety stop case and engage the green
start button.
Simply press the Red button to stop the machine
Cleaning And Maintenance
Before performing any work on the equipment,
pull the power plug.
Regularly clean the ventilation slots, dust build
up can damage the motor.
Grease every three months by turning the drill
to maximum drill depth and greasing the shaft
with oil.
No repairs should be carried out without first
contacting the supplier as this will void your
warranty.
Storage
thoroughly cleans the whole machine and
accessories before storing to keep the machine
in good running condition.
Store out of reach of children in a stable cool
temperature dry place and avoid too high or too
low temperatures.