Lumberjack BDE1200, Инструкция по безопасности и эксплуатации

Страница: 9 / 17

AIR6V 01 AIR6V 01 AIR6V 01 AIR6V 01
BDE1200 07
Assembly Instructions
Assembly
Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be
connected to the mains supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the machine
and the accessories provided.
Before starting the operation of the machine for
the first time, check if all parts listed in the box
content section have been supplied
Note: Check the power tool for possible damage.
Before further use of the machine, check that all
protective devices are fully functional. Any
lightly damaged parts must be carefully checked
to ensure flawless operation of the tool. All parts
must be properly mounted and all conditions
fulfilled that ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Assembling the Dust Collector
In the drum ( 2) you will find all the components
of the hose collection system. Take all parts out
and check to make sure that you have everything
listed below.
8. Filter cartridge
9 .Filter bag
5 .Exhaust hose
6. 2 x hose clamps
7. Hose coupling d 100 mm
Mounting the Filter Bag
– Place filter cartridge ( 8 ) into filter bag ( 9 ).
– Fold any excess bag ( 9 ) inside the filter cartridge
(
8
).