Lumber Jack BS228, Инструкция по безопасности и эксплуатации, Страница: 10 / 26

BS228 08
ASSEMBLY INSTRUCTIONS
Assembly
Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be
connected to the mains supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the machine
and the accessories provided.
Before starting the operation of the machine for
the first time, check if all parts listed in the box
content section have been supplied
Note: Check the power tool for possible damage.
Before further use of the machine, check that all
protective devices are fully functional. Any
lightly damaged parts must be carefully checked
to ensure flawless operation of the tool. All parts
must be properly mounted and all conditions
fulfilled that ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Attaching the foot to band saw
– Put down the machine on a timber according
to the fig.
– Attach foot A & B to band saw by using pan
head screw and washer..
– Place the band saw on a workbench for next
assembly.
– Stand the band saw up on to its stand and then
tighten the nuts fully on the braces.
Fix the lifting handle onto top of band
saw.
Foot
Screw and
washer