.
C
NI
Lumascape USA Inc.
1300 Industrial Rd., Unit #19
San Carlos, CA 94070, USA
T 1-(650)-595-LUMA(5862)
F 1-(650)-595-5820
W www.lumascape.com
Free Call
US & Canada
1-866-695-LUMA(5862)
Lumascape USA Inc. 2006
©
www
.lumascape.com
T 1-(650)-595-LUMA(5862) 1-(650)-595-5820
LUMASCAPE USA INC
Free Call 1-866-695-LUMA(5862)
C1779US 30_2010
Warning: The Luminaire should only be used complete with its protective shield (cover)
IMPORTANT INSTRUCTIONS
Wiring Connections
For Installation LS482 E26 / E27
MODELS
LS482-291XXXRX E26 / E27
120V 60watt Incandscent Max.
120V 23watt Self-ballasted CFL Max.
IP66 rated
1
Mounting fasteners
Supply
not supplied by
Lumascape
Surface Mount Plate
Mounting fasteners
not supplied by
Lumascape
Discreet Mount
Relamping
1
2
Remove head as shown in
.
Remove old lamp from fixture as shown.
step 2
3
4
Insert lamp into fixture as shown in
Seal fixture as shown in
.
step 6.
step 7
7
Fit the head onto the
post and seal by
Re-attach earth spade connector.
tightening all three
screws.
6
3
4
2
Check the lamp wattage and insert
Pull out gear tray and make connections
to supply cable.
the lamp into the lampholder.
Test to ensure that the lamp and
fixture is operational.
Remove the head
from the post by
unscrewing the
three screws.
5
Re-install the gear tray. Ensure bracket
is fitted into groove.
Outside
PCD Ø4.7” (120mm)
Hole Size Ø0.4” (11mm)
