Lumag CNCJ-72FW, Руководство оператора

Страница: 15 / 25

14
CNCJ-72FW CNCJ-80K –BASIC MOTOR
Figure 1A Engine Controls and Components
INITIAL SERVICING
The engine (Figure 1A) must be checked for proper lubrication and filled with fuel prior to
operation. Refer to the manufacturer’s Engine manual for instructions & details of
operations and servicing.
1.
Secondary Air Cleaner – Prevents dirt and other debris from entering the fuel
system. Remove wing-nut on top of air filter canister to gain access to filter element.
2. Choke Lever – Used when starting the engine. Normally used in cold weather
conditions. In cold weather turn the choke lever to the fully closed position, in warm
weather set choke lever half way or completely open.
3. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6–0.7
mm (0.024–0.028 inch). Clean spark plug once a week.
4. Muffler – Used to reduce noise and emissions.
Engine components can generate extreme heat. To prevent burns, DO NOT touch these
areas while the engine is running or immediately after operating. NEVER operate the
engine with the muffler removed.
WARNING