Lumag CNCJ-72FW, Руководство оператора

Страница: 13 / 25

12
CNCJ-72FW CNCJ-80K – CONTROLS
AND COMPONENTS
Figure 1 CNCJ-72FW CNCJ-80K Rammer
Figure 1 shows the location of the controls and components for the CNCJ-72FW and
CNCJ-80K Tamping Rammer. The function of each control is described below:
1. Throttle Lever – Controls engine speed and the tamping action of the rammer.
2. Engine Stop Switch –Controls the starting and stopping of the engine. Switch must
be in the “ON” position when starting the engine.
3. Choke Lever – Used when starting the engine. Normally used in cold weather
conditions. In cold weather turn the choke lever to the fully closed position, in warm
weather set choke lever half way or completely open.
4. Fuel Shut-Off Valve – Supplies fuel from the fuel tank to the engine. To begin fuel
flow move the fuel shut-off valve downward.
5. Pre-Cleaner – Pre-cleans (first stage) dirt and other debris from entering the engine.
6. Foot – Laminated wood with tempered steel plate for superior shock absorption.
CNCJ-72FW CNCJ-80K – CONTROLS