Lumag BSF15, Руководство оператора

Страница: 15 / 20

10
Stump Grinder
Continue with final roots removal
Cut the remaining roots as described in STEP 2 until satisfactorily removed
1. When stopping the machine after normal operation, lower engine speed to slow,
and push the emergency switch.
2. Set park brake before leaving the controls.
3. Shut off the engine by pushing the on/off switch.
In consideration of your own safety and that of others, you should always use the
following normal shutdown procedures before departing from the controls for any
reason including cleaning, servicing, tranporting or inspecting the stump grinder.
Never deviate from this procedure unless so instructed in this manual or in an
emergency that requires it.
A rotating cutting wheel is very dangerous. Stand at controls and ensure that the
cutting wheel comes to a complete stop before doing anything else.
1. Move the engine throttle to the slow position.
2. Push the emergency (on/off) switch to stop the engine.
3. Set park brake before leaving controls.
1. Immediately push the emergency (on/off ) switch for the engine will be shut off.
2. Be sure to allow all moving parts to come to a complete stop.
3. Pull the brake lever to engage the brake.
4. Rectify the emergency situation and return to normal operation.