6
www.LumaComfort.com
S
ET
U
P
I
NSTRUCTIONS
Carefully remove all packaging materials and retain for future storage/use. The
air purifier arrives fully assembled, but the internal filters are packaged for
shipping and must be unwrapped and reinstalled before use.
a.
Open the air purifier’s front grill by placing your hand on top of the air
purifier’s cover, inserting your finger in the slot on the side of the unit and
by pulling the front cover out.
b.
Unwrap the filters and ensure that all of the supplied filters are properly
installed and in the correct order: carbon prefilter, HEPA filter, VOC filter,
TiO2 mesh filter and UV (refer to parts list). Please note that the AP170W
and AP400W models do not have the ionizer function. Never operate the
air purifier without the HEPA filter properly installed.
c.
Choose a suitable location for your air purifier. For best results, use the air
purifier in an enclosed area with the doors and windows closed. Also, as a
general rule, the closer your air purifier is located to the pollution source,
the better the air purifying performance.
d.
Position the air purifier near a power outlet and plug the connector end of
the power cord into the power outlet.
e.
We recommend running the unit on high speed for a few seconds before
each use. After operating it on high speed, you may then adjust the unit to
run at your desired speed.
