Selection of the active motorized LN-Axis
Up to four individual LN-Axes can be controlled using the Keypad SM6-4
.
Selection of the active LN-Axis is done using one of the four selection keys [5].
An illuminated LED on the selection key indicates which LN-Axis is active.
! Note that only one LN-Axis can be active at any point in time !
All settings and values in the display always refer to the active LN-Axis.
Only the active axis can be controlled with the movement keys and hand-wheel
Selection
of the
LN-Axes
Selection keys for the active LN-Axes
The LED on the 'X' key
indicates the X-axis is active
4
The number of LN-Axes available for selection is dependant
on the assembly of the Controller SM-6.
