9
Zero Point
In the display the “pos: Worth” will be set to zero and the current position
stored as the zero point.
This can always be specified again at a later stage.
Press “set position/zero” key
whilst holding down the 'zero' key
Pressing the “zero” key moves the LN-Manipulator
automatically to the zero position
Automatic
Positioning
Two individual positions can be stored by the SM-6 Keypad.
The stored positions can be moved to repeatedly with high (μm) precison
and can be overwritten if desired at a later stage
! WARNING !
Altering the zero-position in Counter 1 also alters
the stored positions (Pos.1 and Pos.2)
according to the new zero-point
Press “set position/zero” key ,then press either
the Pos.1 or Pos.2 key.
The position is saved.
Pressing the appropriate position key moves the LN-Manipulator
to the stored positon.
Storage
Movement
Features
Storage
Movement
+
The display is set to zero and the current position
is stored as the zero position
+
