Lufft CHM 8k, Руководство пользователя, Страница: 4 / 72

General Information 4
1
General Information
This operating manual is part of the equipment. It must always be kept close
to the equipment so that it can be accessed quickly when needed.
This operating manual must be read, understood and observed in all respects
by all persons responsible for the equipment and all persons who work on it.
This applies, in particular, to the chapter "Safety".
Editorial deadline: January 2020
Documentation number: 8349.MEP
This operating manual is valid for the following versions of the equipment with the order numbers:
8349.01-010
8349.11-010
8349.11-003
8349.21-010
8349.31-010 8349.02-010
8349.12-010
8349.22-010
8349.32-010
The description of the DSL modem is given in a separate supplementary sheet.
Manufacturer
G. Lufft Mess- und Regeltechnik GmbH
Gutenbergstraße 20
70736 Fellbach, Germany
Phone +49 711 518 22
– 831
E-mail service@lufft.de
Date Issue Notes
July 2018 R1 Initial release
February 2019 R1.4 Revision, adaptation to new firmware
October 2019 R1.6
Revision chapter 10, technical data, safety advise,
adaptation to new firmware
January 2020 R1.7 Revision, adaptation to new firmware
Copyright
© 2020
This manual is protected by copyright. No part of this manual may be reproduced in any form (photograph,
photocopy, microfilm or any other method) or processed, duplicated or distributed using electronic
systems without the written permission of G. Lufft GmbH. Violations will be prosecuted.
The manual was prepared with due care. No liability is assumed for damages resulting from failure to
observe the information contained in the manual.