Ludlum Measurements 3014, Руководство пользователя

Страница: 79 / 100

5.3. DATALOGGING OPERATION – MODE 3 75
Figure 5.2: Displaying Datalog Location ID Table Index of 36
• The number will be blinking, indicating a changeable value. The user may then enter
the preferred Location ID Table index by a short press of the MODE (to increment the
value) or ON/AUD (to decrement the value) buttons as in Setup mode.
• Once the user has the preferred Location ID Table index entered, a short press of the
LOG button will save the log data.
• After displaying the Datalog Table index, the instrument will return to the previous
mode of operation.
• The Datalog Table is linear; once the table is full, no further writes will be allowed until
the Datalog Table is erased.
5.3 Datalogging Operation – Mode 3
Datalogging Mode 3 will automatically record data log records using the current location
saved in Location Mode 3 with the user settable auto log interval, Mode 3 Timer, settable to
record every 1 to 1800 seconds.
• When the Device is turned on and in RATE or MAX mode, the current radiation reading
and other log data is recorded at the set interval.
• In SCALER Mode:
– Auto log will be paused and will only log at the completion of each count.
– For a continuous Scaler count (Scaler time is 0), logs will be recorded at auto log
interval.
• The Datalog Table is linear; once the table is full, no further writes will be allowed until
the Datalog Table is erased.
J
A short press of the LOG button will start a count and automatically log the re-
sult. An extra-long press of the LOG button during the count will toggle the
display between the timer and reading.
March 2021