Ludlum Measurements 3014, Руководство пользователя

Страница: 41 / 100

4.3. ENTERING SETUP MODE 37
Setting # Setup Parameter
Model
133-6
Model
44-2
Alpha
or Beta
Model
42-31H
Internal
Detector
U-3 6
Unit 3 - COUNT
Units and Minimum
Display
0 (No unit) 000 c 0 (No unit)
U-3 7
Unit 3 - COUNT
Alarm 1
0 (No unit) 2.00 kc 0 (No unit)
U-3 8
Unit 3 - COUNT
Alarm 2
0 (No unit) 5.00 kc 0 (No unit)
U-3 9
Unit 3 - COUNT
Alarm 3
0 (No unit) 8.00 kc 0 (No unit)
U-3 10
Unit 3 - DOSE Units
and Minimum
Display
0 (No unit) 000 c 0 (No unit)
U-3 11
Unit 3 - DOSE Alarm
1
0 (No unit) 2.00 kc 0 (No unit)
U-3 12
Unit 3 - DOSE Alarm
2
0 (No unit) 5.00 kc 0 (No unit)
U-3 13
Unit 3 - DOSE Alarm
3
0 (No unit) 8.00 kc 0 (No unit)
U-3 14 Unit 3 - Channel n/a 1,2 n/a
4.3 Entering Setup Mode
To enter Setup Mode, power on the instrument. Perform an extra-long press of the MODE
button any time after power is applied up until 4 seconds after the main screen is displayed.
This will allow the instrument to enter Setup mode; otherwise, setup enters lock-out mode.
J
If power is already applied, press and hold the ON/AUD button until the count-
down begins and then release. This unlocks Setup mode and re-initializes the
Setup mode, four-second lockout timer.
J
This process is different if you are in Sigma Audio Mode, rather than in the
“click” Audio Mode. To enter Setup Mode with Sigma Mode enabled, once the
power is applied, perform an extra-long press of the MODE button before the
SIGMA background counter starts. Do not wait until the countdown is com-
plete, which will prevent you from getting into the Setup Mode. There is no
countdown for the “click” Audio Mode.
Entry to Setup Mode can be confirmed when the numeric portion of the display shows ‘dev,’
indicating the device setup page is selected. If you simply wish to view the parameters, short
press the MODE button to advance forward through the parameters available on the selected
March 2021