Ludlum Measurements 25024424, Руководство пользователя

Страница: 52 / 91

48 CHAPTER 7. CONFIGURATION
Configurable positions are:
• Units (R/h, R, Sv/h, Sv, dpm, Bq, d, cpm, cps, c, rem/h, rem)
• Decimal Point and Prefix (see following table)
Table 7.3: Display Unit Count Minimum Values
Units
Available decimal points/
prefix combinations
R/h, Sv/h,
rem/h, R, Sv,
rem 0.00
µ
00.0
µ
000
µ
0.00m 00.0m 000m
0.00 00.0 000
dpm, Bq, cpm, cps,
disintegrations, counts 0.00 00.0 000
0.00k 00.0k 000k
Display Unit 1 Count Alert Point - Defines the value of the display unit 1 alert in COUNT
mode. When this level is exceeded, the yellow LED will be on and alert tone will sound.
This value should be above the minimum display value. If an alarm is also enabled, the alert
level should be below the alarm level. Set this to 000 to disable.
Configurable positions are:
• Ones Place (0-9)
• Tens Place (0-9)
• Hundreds Place (0-9)
• Decimal Point and Prefix (see following table)
Table 7.4: Display Unit Count Maximum Values
Units
Available decimal points/
prefix combinations
R/h, Sv/h,
rem/h, R, Sv,
rem X.XX
µ
XX.X
µ
XXX
µ
X.XXm XX.Xm XXXm
X.XX XX.X XXX
dpm, Bq, cpm, cps,
disintegrations, counts X.XX XX.X XXX
X.XXk XX.Xk XXXk
Display Unit 1 Count Alarm Point - Defines the value of the display unit 1 alarm in COUNT
mode. When this level is exceeded, the red LED will be on, an alarm tone will sound, and the
ALARM symbol will flash.
This value should be above the minimum display value. If an alert is also enabled, the alarm
level should be above the alert level. Set this to 000 to disable.
Configurable positions are:
Ludlum Measurements, Inc.