Ludlum Measurements 25024424, Руководство пользователя

Страница: 50 / 91

46 CHAPTER 7. CONFIGURATION
The first portion that can be modified is the unit. While selecting the unit, the unit will be
the only thing on the screen.
Changing to the next portion (pressing the OK button) will show the unit as well as 000 with
a possible decimal point and a possible prefix on the unit. Modifying the position (pressing
the MODE button) will cycle through all available decimal positions and prefixes.
Configurable positions are:
• Units (R/h, Sv/h, dpm, Bq, cpm, cps, rem/h)
• Decimal point and prefix (see the following table)
Table 7.1: Display Unit RATE/MAX Minimum Values
Units Available decimal points/prefix combinations
R/h
Sv/h
rem/h 0.00
µ
00.0
µ
000
µ
0.00m 00.0m 000m
0.00 00.0 000
dpm Bq
cpm cps 0.00 00.0 000
0.00k 00.0k 000k
Display Unit 1 RATE/MAX Maximum Display - This determines the maximum displayable
value for the display unit 1 or RATE mode and MAX mode. If the calculated value is higher
than this, this value will flash and a forced alarm will activate. The unit will be the same as
selected minimum display unit.
Configurable positions are:
• Ones Place (0-9)
• Tens Place (0-9)
• Hundreds Place (0-9)
• Decimal Point and Prefix (see the following table)
Table 7.2: Display Unit RATE/MAX Maximum Values
Units Available decimal points/prefix combinations
R/h
Sv/h
rem/h X.XX
µ
XX.X
µ
XXX
µ
X.XX m XX.X m XXX m
X.XX XX.X XXX
dpm Bq
cpm cps X.XX XX.X XXX
X.XX k XX.X k XXX k
X’s can be replaced with any number for 0 to 9.
Ludlum Measurements, Inc.