7B3
7B4
STEP 7B - ADJUSTABLE SCOUT OPTIONS
Tools Required
- Phillips P1 Screwdriver
LEVEL WITH GROUND
SCOUT POINTING
AT GROUND
12
The Scout works best when it is level with the ground or facing slighting upward. For the majority of
drivers the default Scout position will work well and this step can be skipped (Figure 7B1). However,
if the driver primarily drives with the footplate significantly raised or lowered, the Scout should be
adjusted to an orientation that is level with the ground, to ensure proper functioning and obstacle
detection.
The adjustable footplate bracket allows for variability in Scout orientation (Figure 7B2). If the driver
typically drives with the footplate up, the Scout can be mounted at up to 30 degrees tilt (Figure 7B3).
Caution: Do not mount the Scout facing downward, as this will cause it to see the ground as an
obstacle and inhibit forward motion (Figure 7B4). Note that the Scout should be checked with the
user seated, because the footplates may tilt downward with weight applied.
7B1
7B2
