Lucenti BLACKWAVE PIXLDRIVE1, Руководство пользователя

Страница: 14 / 48

14 CABLING & POWERING UP
Figure 8: BlackWave cabling considerations
The following numbers are valid when all color channels (red, green, blue and white) are fully on
for the maximum amount of supported BlackWave pixel bars per controller (= maximum power
consumption). Less power consuming pixel use will increase the length of allowed extension
cabling.
Setups with less connected pixel bars (possibly mixed in different configurations) will also increase
the length of allowed extension cabling.
Between controller and first bar and NO extension cable between individual bars:
30M
Between 8x BW-100 bars (= max. of 400 pixels) and NO extension cable between first bar and
controller:
10M cable between each bar. Total = 70m.
Between 16x BW-50 bars (= max. of 400 pixels) and NO extension cable between first bar and
controller:
5M cable between each bar. Total = 75m.
6.2 Maximum cabling considerations
The cable lengths might be increased when using less bars or
not using full output (RGBW@Full) on all bars!
max 30m
BW-100 + BW-50
mix BW-100 & BW-50
(max 400. pixels)
8 x BW-100
16 x BW-50
OR
OR
0m 0m 0m
0m 0m
0m 0m