Lucenti BLACKWAVE PIXLDRIVE1, Руководство пользователя, Страница: 29 / 48

29 USING THE BUILT-IN WEB INTERFACE
Mapping type:
‘Sequential’ mapping allows pixel fixtures to be mapped over two universes, with the start channel in
one universe and the end channel in the next. Selecting ‘avoid universe splits’ makes sure that both
the start and end channel of a fixture are part of one universe.
Group pixels:
Grouping pixels allows the user to specify how many physical pixels are grouped together and visually
treated as one single pixel. Grouped pixels appear as one pixel for the control software/lighting desk,
decreasing the total amount of necessary channels to drive the system through Ethernet DMX.
Total amount of pixels:
The total amount of active pixels on this controller (maximum 400). For the BlackWave Collection
products, this means a total of 8x BW-100 bars or 16x BW-50 bars can be connected at once, or any
other combination that not exceeds the amount of 400.
Trigger auto setup:
Auto setup will discover, and auto-address all connected pixel bars and perform the DMX pixel
mapping for the given parameters.
Refresh status:
Check for pixel bars that went offline. Offline pixel bars will receive an orange offline status label. This
might indicate a cabling issue which should be investigated.
9.1.2 DMX Pixel Mapping