Additional Installation Instructions
WaveLAN Legacy Radio Modules
WavePOINT-II - Quick Installation Guide
C-3
■
Use the bracket with the adhesive pads that came with
your WaveLAN/PCMCIA Kit to stick the module to a flat
surface such as a wall or post.
5.
Proceed as described in Chapter 2, “Mounting the Processor
Module” on page 2-7
Mounting the WaveLAN/EAM Radio
C
When you intend to use WavePOINT-II in combination with a
WaveLAN/EAM Kit, you must mount the EAM radio module prior to
mounting the WavePOINT-II Processor Module.
1.
Mount the WaveLAN radio module to the mounting plate as
pictured in Figure C-3 on page C-3.
2.
Guide the cable and connector of the radio module through the
vertical recess as pictured in Figure C-4, to allow the cable and
connector to run ‘free’ outside the mounting plate.
Figure C-3 Mounting the Legacy EAM Radio
3.
When using the standard WaveLAN Legacy omni-directional
antenna for indoor use (see WaveLAN Legacy ), connect the
antenna cable to the WaveLAN/EAM radio module.
wp2_c.book Page 3 Thursday, September 23, 1999 6:24 PM
