WavePOINT-II - Quick Installation Guide
3-1
3
Beyond Quick-Start...
Introduction
3
Once you have powered up your WavePOINT-II hardware, you will
have completed the WavePOINT-II ‘Quick Start’. This chapter will
take you ‘Beyond Quick Start’ and briefly explain how to:
■
Connect Stations to your WavePOINT-II
■
Configure your WavePOINT-II
For more details, consult the WaveMANAGER IEEE User’s Guide
1
or the on-line help system of the WaveMANAGER/AP program.
Connect Stations to your WavePOINT-II
3
When powering up WavePOINT-II for the first time, the unit will
start bridging operation in Access Point mode, using the WaveLAN
parameters as listed in Appendix B ”WavePOINT-II Start-up
Configuration”.
The Access Point mode enables you to connect wireless stations
to the WavePOINT-II, provided that these stations have been
configured to use WaveLAN parameter values that match the
configuration of your WavePOINT-II.
1
A special edition of this document for WaveLAN Legacy systems can be
downloaded from the WaveLAN website.
wp2_c.book Page 1 Thursday, September 23, 1999 6:24 PM
