Before Climbing the Roof...
2-20
Outdoor Antenna Installation Guide
Before Climbing the Roof...
2
Please consult Chapter 3 ”Determine Range & Clearance” to verify
whether you have the correct type of antennas and sufficient
clearance in the signal path to cover the distance between the two
sites that you wish to connect via the wireless link.
Before you start installation, also check the contents of your
outdoor kit. If there are signs of shipment damage, or if any of the
items are missing, please inform your supplier.
Use the following list of items to identify the WaveACCESS
Outdoor Kit components and check that you have all the items
required:
1.
WavePOINT-II device loaded with WaveACCESS Office Router
software.
2.
WaveACCESS adapter card.
3.
WaveACCESS Cable Assembly (to connect item 2 to item 4).
4.
5.
Lucent Technologies low-loss antenna cable (see Note below).
6.
WaveACCESS Outdoor Antenna
Depending on the kit you ordered this could be either the:
■
■
7 dBi Omni-Directional Antenna.
7.
Weather-proofing electrical tape.
8.
This Outdoor Antenna Installation Guide (this document).
NOTE:
Not included in the box, but shipped together with your
WaveACCESS Office Router kit, you should have received
a low-loss antenna cable. Depending on your order, you
would have received either a 6 m (20 ft.), 15 m (50 ft.) or a
22 m (75 ft.) cable. Consult Appendix A ”The Antenna
Cabling System” for more detailed information.
