Overview of the Indoor Installation
Outdoor Antenna Installation Guide
2-9
The cable should not be installed into “tight” positions, as bending
or applying excessive force to the connectors may damage the
antenna cable. Always allow the cable to bend naturally around
corners. The recommended bend radius is 25 mm (1 in.).
The antenna cable must be secured along its complete length. No
part of the antenna cable should be allowed to hang free. This is
particularly important for cable parts that are installed outdoors.
!
CAUTION:
The antenna cable and cable connectors are not designed
to withstand excessive force:
a.
Do not use the connectors as “cable grips” to pull
cable through raceway or conduit.
b.
Do not use the cable connector to support the weight
of the cable during or after installation.
c.
Do not use any appliances to tighten the connectors.
d.
Always seal the connectors using the water-proofing
tape that is included with your Outdoor Kit.
Prior to sealing the outdoor connectors and permanently securing
the cable to the wall using cable ties and wall hooks, you may wish
to verify if the installation and all components function properly.
