Kit Contents
1-8
Outdoor Antenna Installation Guide
About WaveACCESS Office Router
1
The WaveACCESS Office Router is based on a standard
WavePOINT-II device that has been loaded with dedicated
software to enable you to setup a wireless system that supports:
■
WaveACCESS Remote Office Router functionality, or
■
WaveACCESS Central Office Router functionality.
WaveACCESS Remote Office Router
1
With two WaveACCESS Remote Office Router kits, it’s easy to
setup a wireless Point-to-Point link as pictured in Figure 1-1 below.
Figure 1-1 Wireless Point-to-Point Link
The Point-to-Point (PTP) Link functionality enables you to setup a
connection between two locations as an alternative to:
■
Leased lines in building-to-building connections, or
■
Wired Ethernet backbones between WavePOINT-II access
points in ‘hard-to-wire’ environments.
