Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Скачать руководство пользователя страница 15

Страница: 15 / 67

Overview

1-4

Issue 1 August 1998

Call Answer Service

This service plays a greeting and offers callers the following options when they
reach a mailbox of an extension that is not answering their call:

■

Leave a detailed, confidential message in the called party’s mailbox.

■

Press

to transfer to the receptionist’s extension.

■

Press

to transfer to another extension.

Callers can press

before, during, or after leaving a message, or

during

the greeting.

Voice Mail Service

Voice Mail service allows subscribers to manage their own mailboxes. With it, a
subscriber can:

■

Listen to messages.

■

Delete messages.

■

Skip (save) messages.

■

Record a personal greeting.

■

Change the default password for the mailbox to ensure that messages are
kept confidential.

NOTE:

Until a personal greeting is recorded for the mailbox prompt, outside callers
hear the following factory-set greeting:

“Your party is not available. Please leave a

message after the tone.”

See the

Using PARTNER Voice Messaging

guide for instructions for recording a

personal greeting, listening to messages, transferring to another extension, and
changing a password.

Voice Mail Service also enables the System Manager to program the voice
messaging system. See “PARTNER Voice Messaging Programming,” later in this
guide, for more information.

Содержание PARTNER Voice Messaging PC Card Release 2




































































Результаты поиска

Содержание PARTNER Voice Messaging PC Card Release 2

Отзывы:

Бренды по названию

Популярные бренды

Lucent Technologies PARTNER Voice Messaging PC Card Release 2, Установка и программирование

Результаты поиска

Содержание PARTNER Voice Messaging PC Card Release 2

Отзывы:

Бренды по названию

Популярные бренды