Lucent Technologies PacketStar PSAX 45N74 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 104

background image

PacketStar

®

PSAX 3-Port DS3/E3 ATM Protection Module User Guide

, Issue 1

Release 10.0.0

255-700-585

iii

Legal Notices, Safety, and Regulatory

Information

Copyright

Copyright © 2004 by Lucent Technologies. All rights reserved.

This material is protected by the copyright laws of the United States and
other countries. It may not be reproduced, distributed, or altered in any fash-
ion by any entity (either internal or external to Lucent Technologies), except
in accordance with applicable agreements, contracts or licensing, without the
express written consent of the originating organization and the business
management owner of the material.

Trademarks

PacketStar,

Lucent,

Lucent Technologies, and the Lucent Technologies logo are

registered trademarks of Lucent Technologies in the USA. Other product and
brand names mentioned in this guide are trademarks or registered trade-
marks of their respective owners.

Notices

The information in this document is for informational use only, is subject to
change without notice, and should not be construed as a commitment by
Lucent Technologies, Inc. This document is without warranty of any kind,
either expressed or implied. Lucent Technologies, Inc. assumes no responsi-
bility for any errors, inaccuracies, or omissions. Neither is any liability
assumed for damages resulting from the use of the information or instruc-
tions contained herein. Lucent Technologies, Inc. is not responsible for any
damage or loss to your data or equipment resulting either directly or indi-
rectly from use of this document.

Warranty Information

Software and Hardware Limited Warranties

Lucent Technologies provides a 90-day limited software warranty, and a one-
year limited hardware warranty on this product. Refer to the

Software License

and Limited Warranty Agreement

and the

Lucent Technologies InterNetworking Sys-

tems Global Warranty

that accompanied your package for more information.

«
1
2
3
4
5
...
»

Содержание PacketStar PSAX 45N74









































































































Отзывы:

Нет отзывов

Похожие инструкции для PacketStar PSAX 45N74

Бренд: Parasound Страницы: 72

Бренд: Jafar Страницы: 15

Бренд: Danfoss Страницы: 32

PVG 16 PVH/Covers

Бренд: Danfoss Страницы: 112

Бренд: Danfoss Страницы: 44

PVG 16 PVH/Covers

Бренд: Danfoss Страницы: 144

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 64

Бренд: Danfoss Страницы: 8

VLT AutomationDrive FC 360

Бренд: Danfoss Страницы: 60

Бренд: Danfoss Страницы: 6

Бренд: Danfoss Страницы: 4

Бренд: Danfoss Страницы: 8

Бренд: Danfoss Страницы: 2

ECL Comfort 110

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 24

Бренд: Gardigo Страницы: 8

Бренд: Gardigo Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды