3-10
MAX 3000 Installation and Basic Configuration Guide
MAX User Interfaces
Using configuration menus
6
Enter your password within the brackets. The default password for the Full Access login is
Ascend
.
7
Press Enter or the Right Arrow key.
If your password is accepted, you have Full Access privileges.
8
Press Enter.
The Main Edit Menu reappears.
To activate a profile that requires activation, proceed as follows:
1
Open the profile that you want to activate.
2
Press Ctrl-D.
The profile’s DO menu appears.
3
Select L (Load).
The Load Profile menu appears.
4
Select 1 to load the profile.
Profile loaded as current profile
appears.
The newly activated profile reappears.
Returning all values to their defaults
You might occasionally need to return parameter values to default values. To return all values
to their defaults, proceed as follows:
1
At the Main Edit Menu, press Ctrl-D.
The Main Edit Menu’s DO menu appears.
2
Select D (Diagnostics).
The Diagnostics screen appears.
3
Enter the
fclear
command to clear flash memory. (Flash memory stores a copy of the
configuration.)
4
Enter the
nvramclear
command to clear the current configuration from NVRAM and
reset the unit. The MAX restarts with the default configuration.
Using the DO menu
The DO menu is a context-sensitive list of commands that appears when you press Ctrl-D from
any location in the VT100 interface. The commands in the DO menu vary, depending on the
context in which you invoke it. For example, if you press Ctrl-D in a Connection profile, the
DO menu looks similar to the following:
DO
…
>0=ESC
1=Dial
P=Password
S=Save
E=Termserv
D=Diagnostics
To execute a DO command, press and release the Ctrl-D (or the DO key on a
palmtop-controller, which is an optional input device), and then press and release the next key
