MAX User Interfaces
Using configuration menus
MAX 3000 Installation and Basic Configuration Guide
3-9
Saving your changes
When you exit a profile after changing any of its settings, a message asks if you want to save
the changes:
EXIT?
>
0=ESC (Don’t exit)
1=Exit and discard
2=Exit and accept
You can save the profile values by choosing the Exit and Accept option and pressing Enter, or
by pressing the 2 key.
Creating and saving a profile
Some profiles (such as the line configuration profiles) offer a menu of configurable
subprofiles. You can configure as many subprofiles as you need in your environment, and
activate the one you want to use. To create, name, and save a profile, proceed as follows in this
example:
1
Open a Net/T1 > Line Config > Line Config profile.
2
Open an unconfigured subprofile.
3
Set the Name parameter to specify a unique, descriptive name.
4
Continue setting the relevant parameters for your environment.
5
When you are done, press the Back Arrow to exit the menu, the following message
appears:
EXIT?
> 0=ESC (Don’t exit )
1=Exit and discard
2=Exit and accept
6
Select the number for the action you want to take.
Activating a profile
Some profiles, such as the line configuration profiles (BRI/Net > Line Config > any Line
Config profile) must be loaded, or activated, before they take effect. To activate a profile, the
Full Access Security profile must be in effect.
To activate the Full Access Security profile:
1
At the Main Edit Menu, press Ctrl-D.
The DO menu appears.
2
Select P (Password).
3
Press Enter or the Right Arrow key.
The Security menu appears, displaying a list of Security profiles.
4
Select Full Access.
5
Press Enter or the Right Arrow key.
A password entry field appears.
