Lucent Technologies Definity Audix System, Установка и обновление, Страница: 95 / 208

Task 17: Check the Status of the Switch Names Audit
Issue 2 December 1996
3-37
5. Inform the switch system administrator of any entries in the administration
log and ask the administrator to change all non-unique subscriber names
in the switch names database to unique names.
NOTE:
To find non-unique names using G3-MA screen, connect to the
switch and use the data-management option from the main menu.
Create a template by using the
add data-template <name> . Retrieve
the data and sort it using the name as the key. Use the print out to
locate duplicate names.
6. After the system administrator has changed the non-unique subscriber
names in the switch names database, repeat the switch names audit
(Subtask 14K: Run the Switch Names Audit) and steps 1-5 of Task 17:
Check the Status of the Switch Names Audit.
When you run the display administration-log screen, the default values
for Start Date and Time on page 1 are the date and time the screen was
last run. Leave these defaults to display only the new log entries.
If more non-unique subscriber names are found, again ask the switch
system administrator to change all non-unique subscriber names in the
switch names database. Repeat Subtask 14K: Run the Switch Names
Audit and Task 17: Check the Status of the Switch Names Audit until no
non-unique names are found.
7. Once the Switch Names audit has run without creating entries for
non-unique subscriber names in the administration log, proceed to the
tasks in Chapter 4, ‘‘Acceptance Checks’’.