Lucent Technologies Definity Audix System, Установка и обновление, Страница: 76 / 208

Initial System Administration
3-18
Issue 2 December 1996
■
Move the cursor to the Switch Number row corresponding to the host
switch number that you entered in step 2, and enter values for the Logical
Channel field, the Switch Port field, and the Data Link field from Worksheet
B-7a:
Assign the Data Link (CL Integration for non-G3r Switches) or B-7b:
Assign the Data Link (CL Integration for G3r Switches) .
The Logical Channel, Switch Port, and AUDIX numbers must be the same
as the corresponding numbers administered on the switch. These fields
have different names on the switch screens. The field names on the switch
screens corresponding to the DEFINITY AUDIX Switch Link screen field
names are shown in the following table:
3. If the DEFINITY AUDIX System is operating in a DCS environment, repeat
step 3 for each remote switch-node in the DCS network. Refer to
Worksheets B-9 through B-15.
NOTE:
DCS-related switch administration must be done in conjunction with
this task for each switch in the DCS network.
4. Once you have entered values for these fields, press the (F3)
function key to save the changes.
5. Proceed to ‘‘Task 14F: Synchronize DEFINITY AUDIX System and Switch
Clocks’’ on page 3-20.
Table 3-2. Field-Name Correspondence — DEFINITY AUDIX System vs. Switch
DEFINITY AUDIX Processor Channel Screen
Remote
Switch-link DCIU-
SCI Screen
System 75, G1, G3i,s,vs G3r System 85/G2
AUDIX Port Logical
Channel
Interface Channel, or
Remote Processor
Channel
Interface Channel, or
Remote port
Remote port
Switch Port Processor Channel Local Port Local Port
AUDIX Machine ID Machine ID Machine ID
ENTER