Lucent Technologies CellPipe 60A, Руководство пользователя

Страница: 58 / 70

58 CellPipe® 60A/60A-BX User Guide
Host Validators : You can add the following host validators:
Field Name Description
Host IP address IP address of the host, for example 1.1.1.1
Host Subnet mask Subnet mask of the above host, for example
255.255.255.255
Direction Select Inbound, Outbound, or Both
Return to the Interface List and click on the Firewall Trigger
Configuration link. A trigger is the term used to describe what
happens when a secondary port is opened dynamically to allow
protocols such as FTP and NetMeeting to pass data through the
Firewall. Click on New Trigger to add a new firewall trigger.
Firewall Add Trigger : The following fields are required for adding a
firewall trigger:
Field Name Description
Transport type Choose between TCP or UDP
Port number start Enter the starting port number, for example
21 for FTP
Port number end Enter the ending port number, for example 21
for FTP
Allow multiple hosts Choose between allow or block
Max Activity Interval Enter the activity interval per second.
Enable Session
Chaining Choose between allow or block
Enable UDP
Session Chaining Choose between allow or block
Binary Address
Replacement Choose between allow or block
Address Translation
Type Choose between TCP, UDP, both, or none.
Click on Configure Intrusion Detection link under the Policies,
Triggers and Intrusion Detection section. You can select whether