Lucent Technologies Bell Labs CIB 3090, Руководство пользователя

Страница: 5 / 23

Arrows point from the
stand’s mounting slots
to the console’s
mounting tabs
Mounting tabs
Locking tab
FIGURE 4 Attaching the Desk Stand to the Display Console
3
Gently slide the stand upward until the console’s mounting tabs fit
firmly into the narrower opening of the three mounting slots on the
desk stand. Make sure that you push the stand until the locking tab
(Figure 4) is firmly engaged.
ATTACHING CORDS TO THE CONSOLE
Use the following instructions to connect the power cord and the handset
cord to your Display Console:
WARNING: When replacing an (Z7308H01B) Attendant Console
with the Display Console, make sure that you disconnect and
remove the Attendant Console’s Z400f Adapter and its Voice
Terminal Power Supply before attaching any cords to the Display
console. The Attendant Console’s power supply is not
compatible with and may cause damage to the Display Console.
NOTE: If your console’s power supply is not within range of an electrical
outlet, use a 3-prong (third-wire grounded) extension cord.
iss 3, cib3090-4