Lucent Technologies 905 Скачать руководство пользователя страница 41

Страница: 41 / 49

Resetting the Registration Code

6. Maintenance

905 Telephone User’s Guide

503-802-100 (Issue 2 August 1998)

Wait 30 seconds, then pick up the handset and press
PHONE.

The phone should operate properly. If it does not, try the next
method.

Method Two

Follow these steps to reset the registration code.

Remove the handset battery.

Wait 30 seconds and then replace the battery in the
handset battery compartment.

Return the handset to the base and wait 10 seconds.

Pick up the handset and press PHONE.

If the telephone still does not operate properly, try the next
method.

Method Three

Follow these steps to reset the registration code.

Unplug the power adapter from the electrical outlet.

If you have installed a spare battery in the base, remove
it.

Wait 30 seconds and plug the adapter back into the
electrical outlet.

Return the spare battery to the base.

Remove the handset battery and then replace it.

Place the handset in the base, making sure the
CHARGING/HANDSET IN USE light is on.

Wait another 10 seconds, pick up the handset, and press
PHONE.

The telephone should operate properly.

Содержание 905


















































Результаты поиска

Содержание 905

Отзывы:

Похожие инструкции для 905

Бренды по названию

Популярные бренды

Lucent Technologies 905, Руководство пользователя

Результаты поиска

Содержание 905

Отзывы:

Похожие инструкции для 905

Бренды по названию

Популярные бренды