Wall Installation
3. Installing the Telephone
905 Telephone User’s Guide
503-802-100 (Issue 2 August 1998)
19
2
Remove the reversible wedge attached to the base by
depressing the indentation located on the thicker end of
the wedge while gently lifting up and away from the base
as shown in the following illustrations.
Remove Reversible Wedge from Base
Note:
Disregard the instructions labeled "To Change Dial
Mode" on the bottom of the base. These instructions do
not apply to the Business Cordless 905 telephone.
3
Plug one end of the telephone line cord into the jack
labeled LINE on the back of the base.
Note:
The Business Cordless 905 telephone comes with
two telephone line cords–one for PARTNER
Communications Systems and one for MERLIN
Communications Systems. The PARTNER cord is not
labeled. The MERLIN cord contains an orange label that
states, "Use this cord only if you are connecting to a
MERLIN Communications System." Be sure to use the
correct telephone line cord for your system.
Bottom
Top
Push
Wedge
Section
