Installation Instructions
18|
P a g e
v 1 . 0
Maintenance
The THERMASTRIP is made from durable materials, however regular care and maintenance of your heater will help prolong the life
of the heater.
Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning or making and
adjustments to the heater.
It is recommended that you hose down the heater and with a soft cloth gently wipe the surfaces of the heater with a mild detergent to
remove the built up contaminants from the environment. Then rinse all detergent off the heater.
Do not use high pressure water to clean heaters, light water spray only.
All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the heater. In this case, additional
cleaning and maintenance may be required.
The cleaning process at least every three months will reduce the amount of build-up and keep it looking as best it can. If the heater is
in a corrosive environment e.g. salt spray, we recommend that you clean your heater with a light spray of fresh water every week.
After cleaning, turn the heater on for 20 minutes to dry any water residue and prevent water staining.
Do not use any abrasive materials or products to clean the heater, this includes solvents, citrus based cleaners or other harsh
cleaning products.
When handling the heater, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the surface of the
heater.
Do not use high pressure water to clean heaters, light water spray only.
