Installation Instructions
16|
P a g e
v 1 . 0
THERMASTRIP Wall Controller
The THERMASTRIP can be controller via a simple on/off wall mounted switch, however it is recommended to use a controller with a
variable heat modulator and a timer, to give the best performance and lowest running cost.
SKU 200064 wall controller
This optional wall controller is a custom designed and manufactured controller for THERMASTRIP. It has been designed for ease of
use and low running costs of your heater. It provides both temperature control (allowing the user to turn the heat output
up or down depending on the ambient temperature and conditions) and a timer for
automatic heater operation. The countdown timer function has four settings. It can be 1
hour, 2 hours or 4 hours or constantly on. This is ideal when continuous heat is not
required. For example a BBQ, alfresco areas, restaurant dining, assembly line
production etc. It is simple to use, just press the time button and it will switch on, press
again and it will be 1 hour. After one hour the heater will switch off. Depending on the
ambient temperature, there may be a requirement to control the operation of the heater
(standard on position is at full power and temperature). The controller has 3 settings,
they are High, Medium and Low. The controller allows a combination of the multiple
timer (1/2/4 hour) and heat outputs (High/Medium/Low). The default operation is
continuous operation at full temperature.
Controlling multiple units
It is possible to use one wall controller to control multiple heaters.
The wall controller is rated at 15 Amps and 240 volts.
For larger current draw, it is recommended that you talk to your electrician who
can use a time delay relay to connect more units.
The controller needs a minimum of 250W on the load before it starts working.
If connecting multiple units ensure one unit is connected directly to the controller
and the others are connected using a contactor or relay.
Thermostat controllers
Thermostat controllers are NOT recommended. The temperature sensor for this type of controller is usually measured by the air
temperature. The THERMASTRIP is a radiant heater where objects are heated, not the air. In open indoor or outdoor areas, it is
very difficult to contain warm air within the space and therefore accurately measure air temperature. This may result in unnecessary,
continuous operation of the unit.
Dimmers
The use of dimmers with the THERMASTRIP is NOT recommended.
Please refer to the Product Installation Manual for more detailed product data.
