THERMASTRIP Installation Instructions
11 |
P a g e
OPERATION GUIDE
1. Press the POWER button to turn the heater ON/OFF and the screen will display the room temperature. If
the current room temperature is lower than the pre-set temperature the heating function will begin to
operate.
2. To set the temperature, press the SET button then press the UP / DOWN button to increase or decrease
the pre-set temperature. Once the desired temperature is set, the system will automatically update and
return to its normal operational status where the screen displays the room temperature.
3. Press the CHA button followed by the POWER button then the lock indicator light will be illuminated. All
keys are invalid when the lock function is activated.
4. Press the ECO button to switch the display OFF. Press ECO button again to switch the display ON.
NOTE: The maximum pre-set temperature is 45°C.
5. To set the timer, press the SET button twice until the ‘00’ display. Then press the UP / DOWN button to
set the timer. The timer can be set between 1 hour and 24 hours. When the time is set, the system will
automatically save and return to its normal operating status. The timer will be displayed on the screen as
well.
N
OTE: If the temperature reduces by 3°C or more within 2 minutes. (For instance, windows are
accidentally opened when the heater is operating). In this case, the heater will turn off automatically.
The LED display will flash and the heater will make a beeping sound. The heater will resume work
when it is manually power on by the remote control.
6. Press the HIGH/LOW button, the heater will switch between the high and low heating settings. With a
high heat setting, the heater will operate at 100% power, with a low heat setting, the heater will be
operated at 50% power.
Alternatively, the heater can be controlled by the Lucci Connect APP.
Set up the WIFI & in-app control
according to the ‘Lucci CONNECT user guide’.
NOTE: Press the CHA -> HIGH/LOW - >UP buttons in turn to RESET the WIFI setting. The WIFI will be
reset when the WIFI symbol flashes slowly.
Figure 5