Airfusion QUEST II Installation Instructions
8 |
P a g e
ELECTRICAL WIRING DIAGRAM
WARNING:
FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE:
AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
Ensure the motor earth wire is connected to the single earthing terminal block “2” in Fig. 8
Refer to Fig. 8 and following the wiring instruction below:
•
Connect “LIVE” supply wire to the “L” of terminal block (1) on the mounting bracket. (Fig. 8)
•
Connect “NEUTRAL” supply wire to the “N” of terminal block (1) on the mounting bracket. (Fig.8)
•
Connect ground “EARTH” wire to the “
” of terminal block (1) on the mounting bracket. (Fig. 8)
•
Connect motor “EARTH” wire from motor to the “
” of Earth terminal block (2) of the mounting bracket.
(Fig. 8)
•
Connect the output quick connector (4) from the receiver to the quick connector (4) from the fan body.
(Fig. 8)
•
Connect the quick connector (3) from the fan mounting bracket to the input quick connector (3) from the
receiver.
•
Connect the connector (5) from the infrared detector to the input connector (5) from
Remote receiver.
Fig. 8
