Airfusion QUEST II Installation Instructions
10 |
P a g e
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and get familiar with the buttons
and function of each button. (Fig.11)
1.
IR
TRANSMITTER
2.
HI
button: Press the button to set fan running at High speed.
3.
MED
button: Press the button to set fan running at Medium speed.
4.
LOW
button: Press the button to set fan running at Low speed.
5.
OFF
button: Press the button to turn OFF the fan.
6 / 7 / 8.
1Hr / 3 Hr / 6Hr
fan timer button: Press the button to activate the fan timer function, the fan will turn
off after running 1 hour / 3 hours / 6 hours.
9.
LIGHT
button: Press the button to turn ON, press again to turn OFF the light.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorise and
recover the last status when turned on next.
Effective distance/location for IR remote control (Fig. 12)
Left from center-line: Approximately 45 degrees
Right from center-line: Approximately 45 degrees
Distance from remote control to receiver: 5 meters max.
Fig. 11
Fig. 12
