Airfusion Louisville Installation Instructions
9 |
P a g e
FINISHING THE INSTALLATION
INSTALLATION OF THE CANOPY (Fig. 9)
1.
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan’s
accessible metal body back to the earth terminal at the terminal block on the mounting bracket.
2.
Loosen the 2 screws at the bottom of the mouthing bracket.
3.
Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 10)
Fig. 10a
Fig. 10b
Fig. 9
1.
Locate a suitable wall to fix the remote control
holder with the 2 screws. (Fig.10a).
2.
Slide the remote into the holder. (Fig. 10b)
