Airfusion Climate Installation Instructions
9 |
P a g e
Remote Control Buttons
○
1 - FAN SPEED CONTROL BUTTON:
There are 6 available speeds.
○
I
button is for the
lowest speed, and
○
VI
button is for the
highest
speed.
NOTE:
when you turn on the fan for the first time or
switch the main power to the controller, you need to start
the fan on
high
“
○
VI
” speed first and then choose a lower
speed. A 5-10 seconds is required to allow the DC fan
to respond to the remote each speed or fan direction
selection
, as DC fans incorporate a sensor control which
controls the power to the motor.
○
2 - FAN OFF BUTTON:
Press the button to turn the fan off.
○
3 - REVERSE FUNCTION BUTTON:
Press the button to activate the reverse running function. The fan must be operating to activate the reverse
function.
○
4 - LIGHT CONTROL BUTTON:
Press the button to turn on/off the light.
THE RECEIVER PROVIDES THE FOLLOWING LEVEL OF PROTECTION:
•
Lock position: the receiver has a built in safety feature to protect against obstruction during operation.
The motor will be locked from operation and will disconnect from power after 30 seconds of interruption.
Please remove obstacles before re-starting. To reset, simply turn off the power supply to the fan motor
and re-start.
•
Over 80W protection: when the receiver detects power consumption which is greater than 80W, the
receiver power will be stopped and operation will immediately discontinue. Turn the receiver power on
after 5 seconds to restart the fan.
Fig. 11
