Grenada Installation Instructions
7 |
P a g e
V3.0- EN– Published on
10. 2019 (Separate earth)
Hanging the fan (Fig. 7)
Lift the fan assembly onto the mounting bracket. Ensure the
key
slot (A) of the hanger ball is positioned on
the
key pin
(B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.7)
LIGHT KIT Installation (Light kit – sold separately)
NOTE: Light kit must be installed by a Licensed Electrician.
NOTE: The light kit and bulbs are NOT included with this ceiling fan and is available as optional.
1.
Take off the cover from the decorative junction box by loosening the cover screws (Fig.8)
2.
Push the cover cap out from cover.
3.
Insert the L and N light wires (Fig. 9) through the hole of the cover. (Fig.8)
4.
Tighten the fan light kit to light housing cover firmly. Secure light kit to light housing cover via a screw nut
and washer.
5.
Connect the L and N light kit wires to terminal block inside decorative junction box and secure the light
kit nut (Fig. 9) to the cover (Fig.8).
6.
Secure the cover (Fig.8) and the light kit (Fig.9) assembly back to decorative junction box by 3 screws.
7.
Install bulb, and then turn on the power. (Refer to the Fan Light kit instructions for further details)
Fig. 7
Fig. 8
Fig. 9
Decorative
Junction Box
Cover screws
Cover
Cover Cap
Fan Light Kit
L – wire
N – wire
Light Kit nut
Bulb not
included
