16"
C
Drywall Section
THFSUL Wall Mount Installation
Wood Stud
THFSUL Adaptor Plate Installation
Flat Screen Mount Front (Sold Seperately)
5/16-18 Bolts, Washers & Nuts
(Included w/ Flat Screen Mount)
(Sold Seperately)
THFSUL Adaptor Plate
Wall Mounting Slots
(16" O.C)
Lag Screw
Fender Washer
DETAIL C
D
Side View with Monitor Attached
E
DETAIL D
THFSUL Adaptor Plate
THFSUL Channel
Channel Slots
DETAIL E
Retaining Screw
Adaptor Plate Lip
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
THFSUL_Ins (2/10) ©2010 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
1. Carefully pick up the monitor with THFSUL Channels attached
and hook the Channel Slots over the THFSUL Adaptor Plate.
(DETAIL D)
2. Slide the monitor with attached channels on the adaptor plate
until it is centered on the plate.
3. Reach under the monitor and tighten the Retaining Screws using
the provided Hex Wrench. Screw in only until the screws contacts
the Adaptor Plate Lip bend. (DETAIL E)
Caution: DO NOT OVERTIGHTEN the Retaining Screws and check
to make sure the Adaptor Plate Lip is trapped behind the screws.
Attaching Channels
THFSUL Adaptor Plate Installation
Use the hardware provided with the Flat Screen Mount
(purchased separately) to attach the THFSUL Adaptor Plate
to the Flat Screen Mount Front.
Wood Lag Screws are provided for wood stud installations.
For concrete or metal studs, use the WMAAB4, concrete anchor
bolt kit, or WMATB4, toggler bolt kit, and follow the instructions
specific to these fasteners.
1. Find two wood studs in the wall on 16" centers. Determine the
best possible viewing location on the wall.
2. Using the THFSUL Adaptor Plate as a template, mark the locations
for four wood screw pilot holes.
3. Drill the four pilot holes using a 1/8" drill bit, 2-3/4" deep.
4. Attach the THFSUL Adaptor Plate to the wall using the four provided
Lag Screws and Fender Washers. (DETAIL C)
THFSUL Wall Mount Installation
THFSUL INSTALLATION INSTRUCTIONS Page 1 of 2
