Lucam Fairtype 1200 Скачать руководство пользователя страница 8

LUCAM B.V

 

 

Lucam b.v * Dukaat 19 * 8305BC * Emmeloord 

 

 

6. Electrical connection  

 

 

Warning  

Check the power supply at the main switch according to the connections

 

 

 

Pay attention  

Type A earth leakage circuit breakers are not suitable.  

 

 

The air handling units are plug and play, this means that if there is a power supply and control device is 
connected the unit can already run. Depending on the type of unit, the power supply is 230Vac or 400Vac.  

The external connections must be connected in accordance with the supplied terminal strip description.  

6.1 CE-marking 

Lucam b.v. is a company engaged in building air handling units. 
To guarantee our quality and to make it clear that Lucam b.v. delivers quality an independent company is 
switched on. Avan BV has tested the air handling units and they therefore have the CE received approval.  
 
What does a CE inspection entail? 
Many industrial products that appear on the market or are in use within the European Union (EU) taken 
must bear the CE mark. With the mandatory CE marking, the manufacturer of the 
product indicates that the product meets the minimum requirements regarding the safety of the product.  
 
Based on one or more product guidelines, the product is provided with CE marking. Are there 
for example, there are moving parts on the product and an energy supply is the Machinery Directive 
applicable.  
 
Electric driven air handling units clearly fall within the definition of a machine and are based on 
to be CE marked with the requirements of the Machinery Directive. Avan BV is specialized in the guidance of 
manufacturers with regard to the CE marking of machines. The guidance exists among others from:  

 

1.

 

Directive (s) and standard setting 

2.

 

Assessment of the product against the directive (s) 

3.

 

Verification of the documentation against the directive (s) 

4.

 

Contact with suppliers on behalf of the customer 

5.

 

Purchasing advice 

6.

 

Risk inventories 

7.

 

Drawing up the user manual 

8.

 

Review the electrical installation of the machine in accordance with NEN EN IEC 60204-1  

9.

 

Supply of manufacturers declaration of conformity  

 

Содержание Fairtype 1200
















Отзывы: