Spare part list
Floor watering system
Copyright © 2018 Lubing System - All rights reserved
9
3.4 Assembly instructions
Use the table of contents to find the desired assembly
section.
The assembly section describes the individual work steps in the
assembly order. Individual components are applied with item
numbers in the drawings.
3.5 Recommended tools
Find a list of tools below that are needed to install your LUBING
pad air conditioning system.
– measuring tape,
– hand saw,
– chalk line/cord,
– jig saw or circular saw,
– spirit level,
– cordless screwdriver,
– socket wrench (for clamps),
– ladder/stilts,
– cutter knife.
3.6 Installation procedure
The opening in the stable should have a wood frame of waterproof
wood.
For systems <12 m/40 ft. in length, the supply unit may be placed
at the end of the system. For longer system and generally, the
supply unit should always be positioned at the center of the
frame.
3.6.1 Installation of the pipe, bottom,
and bracket holders
Start assembly from the center. Mark the center with a line at
the upper and lower section. You can find the holder positioning
points in the following figures.
3.6.2 Assembly of the supply unit and holder for the water trough
Start assembly by installing the supply unit. The supply unit should always be placed at the center of the entire
frame if possible. The impact edge of the plastic housing should be precisely centered on the frame. For positioning
of the bracket holders, see illustration below.
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
