Lube1 ATF602, Руководство пользователя

Страница: 17 / 39

® Copyright, Lube1, 2019, all rights reserved. / Misprints and technical changes reserved / Date: 2019-04
17
AFTER THE PROCESS IT IS RECOMMENDED TO CHANGE THE GEAR OIL FILTER.
WHEN CHANGING THE FILTER, AN ADDITIONAL QUANTITY OF OIL MAY BE REMOVED FROM
THE GEARBOX.
THIS QUANTITY MUST BE TAKEN INTO ACCOUNT WHEN REFILLING.
Correct filling level (add oil) after gearbox filter change
ENTER TOTAL OIL QUANTITY (OIL D QUANTITY FROM OIL PAN if necessary)
(E.G. 4 LITRES COULD BE DRAINED, 1 LITRE WAS STILL IN THE OIL SUMP, 5 LITRES HAVE
TO BE ADDED AGAIN) AT THE END OF THE TEST IT IS MANDATORY TO CHECK THE OIL
LEVEL AND CORRECT IT USING THE DEVICE IF NECESSARY.
Fill level control is mostly while the engine is running and at the temperature specified by the manufacturer. (Can be
seen in the car manual or in the diagnostic unit).
Either via riser pipe, measuring rod or level control screw.
Via the menu level correction add oil as long as necessary or if necessary also suck off oil until the level is correct.