30368519EN-02
14
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
5.6 Drain line
The drain line diameter must be at least the size
of the driptray drain diameter and should be laid
with an adequate slope. For room temperatures
below 0° C drain line insulation and defrosting
are required.
A syphon must be installed on the drain line,
outside the cold room
Tighten drain connection by hand only.
Picture shows the T-connection for refrigerant
and hotgas defrost inlet.
5.5 Hotgas connection (optional)
hotgas
connection
refrigerant
connection
