30368519EN-02
6
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
2.3 Options
• Electric defrost
For cold rooms with room temperatures below 4 °C and where frost build-up is likely, the appli-
cation of a defrosting system is advised. Electric defrost for Optigo CC consists of stainless steel
heater elements. The defrost elements are connected to separate terminals in the terminal box.
Available defrost systems are:
- Electric defrost in coil (standard E, heavy E2)
- Electric defrost in driptray (HD)
- Hotgas defrost in driptray (HG)
- Electric defrost in driptray & hotgas in coil
• Driptray insulation 12 mm + cladding (IS)
• Shut-up sock (S)
• Airsock adapter ring (SR)
Available for CC400 and CC500 draw-through models only.
• Coil protection
- Pre-coated aluminium fins (EP)
- Cataphoresis treatment (CA)
• Stainless steel casing and frame (SS)
• Fan ring heater (FRH)
• Re-heating coil (RH)
• Switch on/off (SW)
• Fan motors wired to connection box (CB)
2.4 Code description
CC B E H E 50 1 .2 A S *
CR
SS E
*
EP
7.0 CU IS
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17
18
19
1
Commercial unit cooler
2
Air direction (default=draw-through, B=blow-through)
3
Refrigerant system (E= HFO/HFC DX, X=CO2 DX, W=brine)
4
Fan speed (H=high speed, L=low speed)
5
Fan motor type (blank=AC, E=EC)
6
Fan diameter (25=250, 30=300, 35=350, 40=400, 50=500 mm)
7
Number of fans (1 to 4)
8
CC version
9
Tube rows code (A, B, C)
10
No. of phases (S=1, T=3)
11
No. of circuits
12
Packing (BO=box, CR=crate)
13
Casing material (PC=powder coated, SS= stainless steel)
14
Defrost system (A=air defrost, E=electric defrost, HG=hotgas, HG+E= electric
defrost in driptray)
15
Electrical options
16
Fin material (AL=aluminium, EP=epoxy coated aluminium, CA=cataphoresis)
17
Fin spacing (4, 5.5, 7, 10, 12 mm)
18
Tube material (CU=copper)
19 Options
