LTS VSIP7643W-SZ, Быстрое руководство

Страница: 3 / 15

2
components for the RJ45 plug must be used properly to protect
the network cable from water.

Make sure the wall or ceiling is strong enough to support the
weight of the camera. If dust falls during mounting, take off the
dome cover and keep it away from dust. Install the dome cover
after the base is installed.

Purchase a bracket if you need to increase the field of view.
Contact your local dealer for details.

Contact professionals for maintenance information. Do not
attempt to dismantle the device by yourself. We shall not assume
any responsibility for problems caused by unauthorized repair or
maintenance.
Maintenance

Caution: There will be risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.

If there is dust on the lens or the transparent dome cover, remove
the dust gently using an oil-free brush or a rubber dust blowing
ball.

If there is grease on the lens, remove the grease using lens
cleaning cloth gently and then clean the lens in a circular spiral
from the center outward using lens cleaning cloth dipped with
small amount of cleaning solution. If the grease still cannot be
removed, use oil-free cloth or lens cleaning paper and clean the
lens gently until it is removed.

If there is grease or a dust stain on the transparent dome cover,
clean the cover gently from the center outward using lens cleaning
cloth. If the grease or the stain still cannot be removed, use lens
cleaning cloth dipped with detergent and clean the dome cover
gently until it is removed.

Do not use organic solvents, such as benzene or ethanol when
cleaning the transparent dome cover.