LTS VSIP7643W-SZ, Быстрое руководство

Страница: 14 / 15

13

The preceding installation process is concealed
installation, during which holes are drilled in the
ceiling and tail cable is led out from the top of your
camera. Cables are connected and frapped at the
ceiling side to prevent messy cables from affecting
camera mounting. If open installation is adopted,
tail cable is led out from one side of your camera
and can be routed from the side groove of your
camera.

After mounting the dome cover, check that the
torx screws on the edge of the dome cover are
tightened up to ensure that your camera is
properly sealed. For details, see Mount the
transparent dome cover.
Access Your Camera
Before you begin, check that:

Your camera is operating properly and connected to the
network.

The PC you are using is installed with Internet Explorer
7.0 or later.
Follow these steps to access your camera through the Web
interface:
7. Open your browser, input the IP address of your camera
in the address bar and then press
Enter to open the
login page.